G01型減壓閥
G01 Gas regulators
G01型高壓?jiǎn)渭墭藴柿髁繙p壓閥，單級式調壓結構；適用于非腐蝕性氣體等。
G01 High-Pressure Single-Stage Standard Flow Gas regulators Single-stage pressure regulation structure; suitable for non-corrosive gases, etc.
適用范圍
實驗室
分析儀器
一般工業氣體
工廠設備
Applications
Laboratories
Analytical instruments
General industrial gases
Factory equipment
技術參數
最大輸入壓力：3000 psig
可控輸出壓力：0至15/24/35/60/90/150/240/350 psig
工作溫度：-10至＋60℃
閥體螺紋： NPT 1/4" F
Technical Specifications
Maximum inlet pressure: 3000 psig
Controlled outlet pressure: Adjustable from 0 to 15/24/35/60/90/150/240/350 psig
Operating temperature: -10 to +60°C
Valve body thread: NPT 1/4" F
部件材質
閥體、提升閥針、提升閥座：HPb59-1
提升閥密封墊： NBR / EPDM
膜片： NBR / EPDM
Material Composition
Valve body： HPb59-1 (high-lead brass)
valve needle, valve seat: SUS316L/SUS304
Valve seal: PCTFE/PCTFE
Diaphragm: NBR / EPDM
外形安裝尺寸 Installation Dimensions
產品特點
單級式調壓結構
純凈水清洗
進口采用不銹鋼金屬過濾網，帶前面板安裝孔
采用精度1.6KL壓力表
Features
Single-stage pressure regulation design
Purified water cleaning process
Inlet equipped with stainless steel mesh filter and front panel mounting holes
Precision 1.6KL pressure gauge
【參考】為產品改良而未提前通知變更的尺寸，請與我公司聯系了解。
Additional Notes: For customized modifications or dimensional changes, contact our company for confirmation
【注】1、使用壓力應該在壓力表全量程的60％以?xún)取?/strong>
2、1MPa=10bar=9.87atm=145.03psig=10.2kg/cm2=7500mmHg
Notes
1. Operating pressure should be within 60% of the full scale** of the pressure gauge.
2. Unit conversion: 1 MPa = 10 bar = 9.87 atm = 145.03 psig = 10.2 kg/cm2 = 7500 mmHg.
智藥研習社官方微信
制藥在線官方微信
2006-2025 上海博華國際展覽有限公司版權所有（保留一切權利）
滬ICP備05034851號-57
